diff --git a/hardware/rev_b.md b/hardware/rev_b.md
index 4259e60..8fa8a0e 100644
--- a/hardware/rev_b.md
+++ b/hardware/rev_b.md
@@ -1,6 +1,6 @@
# Rev.B (With or without front light)
-
+
# Parts list
@@ -37,10 +37,22 @@ Mount the two M3x12 standoff F-F (Yellow) at the front with the last two of the
Place the displays on the top of the 11mm standoffs and mount them with the 6mm screws.
+**NOTE:** The WeAct displays work fine but have 8 pins, the displays in the complete kit supplied by BTClock have 10 pins. When using WeAct displays the two most right pins are not used, see the pictures below.
+
+**NOTE:** Keep in mind, if you have chosen to use the WeAct displays, you have to solder the headers (The yellow ones) by yourself.
+
+
+
+(only for WeAct displays)
+
+
+
+(only for WeAct displays)
+
Keep in mind that at the corners on the top of the first (left corner) and last (right corner) display you don't use a screw, this is where a 6mm standoff has to placed to screw the front pcb in combination with acrylic front. For mounting the fromt pcb with the acrylic front use the M3x10 screw.
-
+
-At last, place the acrylic back on the back with the last 8 M3x6 screws.
\ No newline at end of file
+As final step, place the acrylic back on the back with the last 8 M3x6 screws (Don't forget to remove any protective foil on both sides)
\ No newline at end of file
diff --git a/media/Rev.B/IMG_3548.jpeg b/media/Rev.B/IMG_3548.jpeg
new file mode 100644
index 0000000..e924ec4
Binary files /dev/null and b/media/Rev.B/IMG_3548.jpeg differ
diff --git a/media/Rev.B/IMG_3549.jpeg b/media/Rev.B/IMG_3549.jpeg
new file mode 100644
index 0000000..51da056
Binary files /dev/null and b/media/Rev.B/IMG_3549.jpeg differ
diff --git a/media/Rev.B/IMG_3550.jpeg b/media/Rev.B/IMG_3550.jpeg
new file mode 100644
index 0000000..cb3117b
Binary files /dev/null and b/media/Rev.B/IMG_3550.jpeg differ