add mqtt module

Reviewed-on: btclock/btclock_v3#5

.forgejo/workflows/push.yaml

@@ -1,4 +1,4 @@
-name: 'BTClock CI'
+name: "BTClock CI"
 
 on:
   push:
@@ -22,7 +22,7 @@ jobs:
         with:
           node-version: lts/*
           cache: yarn
-          cache-dependency-path: '**/yarn.lock'
+          cache-dependency-path: "**/yarn.lock"
       - uses: actions/cache@v4
         with:
           path: |
@@ -34,8 +34,8 @@ jobs:
           key: ${{ runner.os }}-pio
       - uses: actions/setup-python@v5
         with:
-          python-version: '3.9'
-          cache: 'pip'
+          python-version: "3.9"
+          cache: "pip"
       - name: Get current date
         id: dateAndTime
         shell: bash
@@ -48,7 +48,7 @@ jobs:
         run: mkdir -p junit-reports && pio test -e native_test_only --junit-output-path junit-reports/
       - name: Build BTClock firmware
         shell: bash
-        run: pio run 
+        run: pio run
       - name: Build BTClock filesystem
         shell: bash
         run: pio run --target buildfs
@@ -81,9 +81,9 @@ jobs:
             version: esp32s3
         epd_variant: [213epd, 29epd]
         exclude:
-          - chip: {name: btclock_rev_b, version: esp32s3}
+          - chip: { name: btclock_rev_b, version: esp32s3 }
             epd_variant: 29epd
-          - chip: {name: btclock_v8, version: esp32s3}
+          - chip: { name: btclock_v8, version: esp32s3 }
             epd_variant: 29epd
     steps:
       - uses: https://code.forgejo.org/forgejo/download-artifact@v4
@@ -93,9 +93,10 @@ jobs:
       - name: Install esptools.py
         run: pip install --upgrade esptool
       - name: Create merged firmware binary
+        shell: bash
         run: |
+          mkdir -p ${{ matrix.chip.name }}_${{ matrix.epd_variant }} 
           if [ "${{ matrix.chip.name }}" == "btclock_v8" ]; then
-            mkdir -p ${{ matrix.chip.name }}_${{ matrix.epd_variant }} && \
             esptool.py --chip ${{ matrix.chip.version }} merge_bin \
             -o ${{ matrix.chip.name }}_${{ matrix.epd_variant }}/${{ matrix.chip.name }}_${{ matrix.epd_variant }}.bin \
             --flash_mode dio \
@@ -105,10 +106,19 @@ jobs:
             0x8000 .pio/build/${{ matrix.chip.name }}_${{ matrix.epd_variant }}/partitions.bin \
             0xe000 .pio/build/${{ matrix.chip.name }}_${{ matrix.epd_variant }}/ota_data_initial.bin \
             0x10000 .pio/build/${{ matrix.chip.name }}_${{ matrix.epd_variant }}/firmware.bin \
-            0x810000 .pio/build/${{ matrix.chip.name }}_${{ matrix.epd_variant }}/littlefs.bin;
+            0xDF0000 .pio/build/${{ matrix.chip.name }}_${{ matrix.epd_variant }}/littlefs_16MB.bin
+          elif [ "${{ matrix.chip.name }}" == "btclock_rev_b" ]; then
+            esptool.py --chip ${{ matrix.chip.version }} merge_bin \
+            -o ${{ matrix.chip.name }}_${{ matrix.epd_variant }}/${{ matrix.chip.name }}_${{ matrix.epd_variant }}.bin \
+            --flash_mode dio \
+            --flash_freq 80m \
+            --flash_size 8MB \
+            0x0000 .pio/build/${{ matrix.chip.name }}_${{ matrix.epd_variant }}/bootloader.bin \
+            0x8000 .pio/build/${{ matrix.chip.name }}_${{ matrix.epd_variant }}/partitions.bin \
+            0xe000 .pio/build/${{ matrix.chip.name }}_${{ matrix.epd_variant }}/ota_data_initial.bin \
+            0x10000 .pio/build/${{ matrix.chip.name }}_${{ matrix.epd_variant }}/firmware.bin \
+            0x6F0000 .pio/build/${{ matrix.chip.name }}_${{ matrix.epd_variant }}/littlefs_8MB.bin;
           else
-            # Original command for other cases
-            mkdir -p ${{ matrix.chip.name }}_${{ matrix.epd_variant }} && \
             esptool.py --chip ${{ matrix.chip.version }} merge_bin \
             -o ${{ matrix.chip.name }}_${{ matrix.epd_variant }}/${{ matrix.chip.name }}_${{ matrix.epd_variant }}.bin \
             --flash_mode dio \
@@ -116,19 +126,26 @@ jobs:
             0x8000 .pio/build/${{ matrix.chip.name }}_${{ matrix.epd_variant }}/partitions.bin \
             0xe000 .pio/build/${{ matrix.chip.name }}_${{ matrix.epd_variant }}/ota_data_initial.bin \
             0x10000 .pio/build/${{ matrix.chip.name }}_${{ matrix.epd_variant }}/firmware.bin \
-            0x370000 .pio/build/${{ matrix.chip.name }}_${{ matrix.epd_variant }}/littlefs.bin
+            0x380000 .pio/build/${{ matrix.chip.name }}_${{ matrix.epd_variant }}/littlefs_4MB.bin
             # Adjust the offset for littlefs or other files as needed for the original case
           fi
 
       - name: Create checksum for firmware
+        shell: bash
         run: shasum -a 256 .pio/build/${{ matrix.chip.name }}_${{ matrix.epd_variant }}/firmware.bin | awk '{print $1}' > ${{ matrix.chip.name }}_${{ matrix.epd_variant }}/${{ matrix.chip.name }}_${{ matrix.epd_variant }}_firmware.bin.sha256
 
       - name: Create checksum for merged binary
+        shell: bash
         run: shasum -a 256 ${{ matrix.chip.name }}_${{ matrix.epd_variant }}/${{ matrix.chip.name }}_${{ matrix.epd_variant }}.bin | awk '{print $1}' > ${{ matrix.chip.name }}_${{ matrix.epd_variant }}/${{ matrix.chip.name }}_${{ matrix.epd_variant }}.bin.sha256
 
       - name: Create checksum for littlefs partition
-        run: shasum -a 256 .pio/build/${{ matrix.chip.name }}_${{ matrix.epd_variant }}/littlefs.bin | awk '{print $1}' > ${{ matrix.chip.name }}_${{ matrix.epd_variant }}/littlefs.bin.sha256
-
+        shell: bash
+        run: |
+          fs_file=$(find .pio/build/${{ matrix.chip.name }}_${{ matrix.epd_variant }} -name "littlefs*.bin")
+          echo $fs_file
+          fs_name=$(basename "$fs_file")
+          shasum -a 256 "$fs_file" | awk '{print $1}' > "${{ matrix.chip.name }}_${{ matrix.epd_variant }}/${fs_name}.sha256"
+          cat "${{ matrix.chip.name }}_${{ matrix.epd_variant }}/${fs_name}.sha256"
       - name: Copy all artifacts to output folder
         run: cp .pio/build/${{ matrix.chip.name }}_${{ matrix.epd_variant }}/*.bin .pio/boot_app0.bin ${{ matrix.chip.name }}_${{ matrix.epd_variant }}
 
@@ -161,13 +178,13 @@ jobs:
       - name: Create release
         uses: https://code.forgejo.org/actions/forgejo-release@v2.4.0
         with:
-          url: 'https://git.btclock.dev'
-          repo: '${{ github.repository }}'
+          url: "https://git.btclock.dev"
+          repo: "${{ github.repository }}"
           direction: upload
-          tag: '${{ github.ref_name }}'
-          sha: '${{ github.sha }}'
+          tag: "${{ github.ref_name }}"
+          sha: "${{ github.sha }}"
           release-dir: release
           token: ${{ secrets.TOKEN }}
           override: ${{ github.ref_type != 'tag' && github.ref_name != 'main' }}
           prerelease: ${{ github.ref_type != 'tag' && github.ref_name != 'main' }}
-          release-notes-assistant: false
+          release-notes-assistant: false

README.md

@@ -17,7 +17,7 @@ Biggest differences with v2 are:
 New features:
 - BitAxe integration
 - Zap notifier
-- 
+- Braiins Pool and Ocean mining stats integration
 
 "Steal focus on new block" means that when a new block is mined, the display will switch to the block height screen if it's not on it already.
 
@@ -27,4 +27,31 @@ Most [information](https://github.com/btclock/btclock_v2/wiki) about BTClock v2
 
 ## Building
 
-Use PlatformIO to build it yourself. Make sure you fetch the [WebUI](https://github.com/btclock/webui) submodule.
+Use PlatformIO to build it yourself. Make sure you fetch the [WebUI](https://github.com/btclock/webui) submodule.
+
+
+## Braiins Pool and Ocean integration
+Enable mining pool stats by accessing your btclock's web UI (point a web browser at the device's IP address).
+
+Under Settings -> Extra Features: toggle Enable Mining Pool Stats.
+
+New options will appear. Select your mining pool and enter your pool username (Ocean) or api key (Braiins).
+
+The Mining Pool Earnings screen displays:
+* Braiins: Today's mining reward thus far
+* Ocean: Your estimated earnings if the pool were to find a block right now
+
+
+### Braiins Pool integration
+Create an API key based on the steps [here](https://academy.braiins.com/en/braiins-pool/monitoring/#api-configuration).
+
+The key's permissions should be:
+* Web Access: no
+* API Access: yes
+* Access Permissions: Read-only
+
+Copy the token that is created for the new key. Enter this as your "Mining Pool username or api key" in the btclock web UI.
+
+
+### Ocean integration
+Your "Mining Pool username" is just the onchain withdrawal address that you specify when pointing your miners at Ocean.

data

@@ -1 +1 @@
-Subproject commit f0fa58b5ea60f695aeaae9ddd7138cbb3686e96a
+Subproject commit fd328d4f05345eaa73cf27d05bb542eaa6915cdb

lib/btclock/bitaxe_handler.cpp

@@ -24,7 +24,7 @@ std::array<std::string, NUM_SCREENS> parseBitaxeHashRate(std::string text)
     }
 
     ret[NUM_SCREENS - 1] = "GH/S";
-    ret[0] = "BIT/AXE";
+    ret[0] = "mdi:bitaxe";
 
     return ret;
 }
@@ -37,7 +37,7 @@ std::array<std::string, NUM_SCREENS> parseBitaxeBestDiff(std::string text)
     if (text.length() < NUM_SCREENS)
     {
         text.insert(text.begin(), NUM_SCREENS - text.length(), ' ');
-        ret[0] = "BIT/AXE";
+        ret[0] = "mdi:bitaxe";
         ret[1] = "mdi:rocket";
         firstIndex = 2;
     }

lib/btclock/data_handler.cpp

@@ -73,7 +73,8 @@ std::array<std::string, NUM_SCREENS> parsePriceData(std::uint32_t price, char cu
     std::string priceString;
     if (std::to_string(price).length() >= NUM_SCREENS || useSuffixFormat)
     {
-        priceString = getCurrencySymbol(currencySymbol) + formatNumberWithSuffix(price, NUM_SCREENS - 2, mowMode);
+        int numScreens = shareDot || mowMode ? NUM_SCREENS - 1 : NUM_SCREENS - 2;
+        priceString = getCurrencySymbol(currencySymbol) + formatNumberWithSuffix(price, numScreens, mowMode);
     }
     else
     {
@@ -84,16 +85,24 @@ std::array<std::string, NUM_SCREENS> parsePriceData(std::uint32_t price, char cu
     {
         priceString.insert(priceString.begin(), NUM_SCREENS - priceString.length(), ' ');
 
-        ret[0] = "BTC/" + getCurrencyCode(currencySymbol);
+        if (mowMode)
+        {
+            ret[0] = "MOW/UNITS";
+        }
+        else
+        {
+            ret[0] = "BTC/" + getCurrencyCode(currencySymbol);
+        }
 
 
         firstIndex = 1;
     }
     
-    if (shareDot)
+    size_t dotPosition = priceString.find('.');
+
+    if (shareDot && dotPosition != std::string::npos && dotPosition > 0)
     {
         std::vector<std::string> tempArray;
-        size_t dotPosition = priceString.find('.');
         if (dotPosition != std::string::npos && dotPosition > 0)
         {
             for (size_t i = 0; i < priceString.length(); ++i)
@@ -137,9 +146,26 @@ std::array<std::string, NUM_SCREENS> parseSatsPerCurrency(std::uint32_t price,ch
 
     if (priceString.length() < (NUM_SCREENS))
     {
-        priceString.insert(priceString.begin(), NUM_SCREENS - priceString.length(), ' ');
+        // Check if price is greater than 1 billion
+        if (price >= 100000000)
+        {
+            double satsPerCurrency = (1.0 / static_cast<double>(price)) * 1e8; // Calculate satoshis
+            std::ostringstream oss;
+            oss << std::fixed << std::setprecision(3) << satsPerCurrency; // Format with 3 decimal places
+            priceString = oss.str();
+        }
+        else
+        {
+            priceString = std::to_string(static_cast<int>(round(1.0 / static_cast<double>(price) * 1e8))); // Default formatting
+        }
 
-        if (currencySymbol != CURRENCY_USD)
+        // Pad the string with spaces if necessary
+        if (priceString.length() < NUM_SCREENS)
+        {
+            priceString.insert(priceString.begin(), NUM_SCREENS - priceString.length(), ' ');
+        }
+
+        if (currencySymbol != CURRENCY_USD || price >= 100000000) // no time anymore when earlier than 1
             ret[0] = "SATS/" + getCurrencyCode(currencySymbol);
         else 
             ret[0] = "MSCW/TIME";
@@ -322,9 +348,9 @@ emscripten::val parseBlockHeightArray(std::uint32_t blockHeight)
     return arrayToStringArray(parseBlockHeight(blockHeight));
 }
 
-emscripten::val parsePriceDataArray(std::uint32_t price, const std::string &currencySymbol, bool useSuffixFormat = false)
+emscripten::val parsePriceDataArray(std::uint32_t price, const std::string &currencySymbol, bool useSuffixFormat = false, bool mowMode = false, bool shareDot = false)
 {
-    return arrayToStringArray(parsePriceData(price, currencySymbol[0], useSuffixFormat));
+    return arrayToStringArray(parsePriceData(price, currencySymbol[0], useSuffixFormat, mowMode, shareDot));
 }
 
 emscripten::val parseHalvingCountdownArray(std::uint32_t blockHeight, bool asBlocks)

lib/btclock/utils.cpp

@@ -83,14 +83,31 @@ std::string formatNumberWithSuffix(std::uint64_t num, int numCharacters, bool mo
     }
 
     // Add suffix
-    int len = snprintf(result, sizeof(result), "%.0f%c", numDouble, suffix);
+    int len;
+
+    // Mow Mode always uses string truncation to avoid rounding
+    std::string mowAsString = std::to_string(numDouble);
+    if (mowMode) {
+        // Default to one decimal place
+        len = snprintf(result, sizeof(result), "%s%c", mowAsString.substr(0, mowAsString.find(".") + 2).c_str(), suffix);
+    }
+    else
+    {
+        len = snprintf(result, sizeof(result), "%.0f%c", numDouble, suffix);
+    }
 
     // If there's room, add more decimal places
     if (len < numCharacters)
     {
         int restLen = mowMode ? numCharacters - len : numCharacters - len - 1;
-        
-        snprintf(result, sizeof(result), "%.*f%c", restLen, numDouble, suffix);
+
+        if (mowMode) {
+            snprintf(result, sizeof(result), "%s%c", mowAsString.substr(0, mowAsString.find(".") + 2 + restLen).c_str(), suffix);
+        }
+        else
+        {
+            snprintf(result, sizeof(result), "%.*f%c", restLen, numDouble, suffix);
+        }
     }
 
     return result;

maintainers.yaml

@@ -0,0 +1,20 @@
+identifier: BTClock
+maintainers:
+- npub1k5f85zx0xdskyayqpfpc0zq6n7vwqjuuxugkayk72fgynp34cs3qfcvqg2
+relays:
+- wss://relay.noderunners.network/
+- wss://nostr.sathoarder.com/
+- wss://offchain.pub/
+- wss://nostr3.daedaluslabs.io/
+- wss://nostr4.daedaluslabs.io/
+- wss://nostr.dbtc.link/
+- wss://purplepag.es/
+- wss://nos.lol/
+- wss://nostr1.daedaluslabs.io/
+- wss://nostr.noderunners.network/
+- wss://nostr.lnbitcoin.cz/
+- wss://relay.primal.net/
+- wss://relay.damus.io
+- wss://nostr-relay.derekross.me/
+- wss://nostr2.azzamo.net/
+- wss://nostr2.daedaluslabs.io/

partition.csv

@@ -3,5 +3,5 @@ nvs,      data, nvs,     0x9000,  0x5000,
 otadata,  data, ota,     0xe000,  0x2000,
 app0,     app,  ota_0,   0x10000, 0x1b8000,
 app1,     app,  ota_1,   ,        0x1b8000,
-spiffs,   data, spiffs,  ,        0x66800,
-coredump, data, coredump,,        0x10000,
+spiffs,   data, spiffs,  ,        0x66C00,
+coredump, data, coredump,,        0x10000,

partition_16mb.csv

@@ -1,7 +1,7 @@
 # Name,   Type, SubType, Offset,  Size, Flags
-nvs,      data, nvs,     36K,     20K,
-otadata,  data, ota,     56K,     8K,
-app0,     app,  ota_0,   64K,     4096K,
-app1,     app,  ota_1,   ,        4096K,
-spiffs,   data, spiffs,  ,        410K,
-coredump, data, coredump,,        64K,
+nvs,      data, nvs,     0x9000,  0x5000,
+otadata,  data, ota,     0xe000,  0x2000,
+app0,     app,  ota_0,   0x10000, 0x6F0000,
+app1,     app,  ota_1,   ,        0x6F0000,
+spiffs,   data, spiffs,  ,        0x200000,
+coredump, data, coredump,,        0x10000,

partition_8mb.csv

@@ -1,7 +1,7 @@
 # Name,   Type, SubType, Offset,  Size, Flags
-nvs,      data, nvs,     36K,     20K,
-otadata,  data, ota,     56K,     8K,
-app0,     app,  ota_0,   64K,     1760K,
-app1,     app,  ota_1,   ,        1760K,
-spiffs,   data, spiffs,  ,        410K,
-coredump, data, coredump,,        64K,
+nvs,      data, nvs,     0x9000,  0x5000,
+otadata,  data, ota,     0xe000,  0x2000,
+app0,     app,  ota_0,   0x10000, 0x370000,
+app1,     app,  ota_1,   ,        0x370000,
+spiffs,   data, spiffs,  ,        0xCD000,
+coredump, data, coredump,,        0x10000,

platformio.ini

@@ -20,8 +20,9 @@ framework =  arduino, espidf
 monitor_speed = 115200
 monitor_filters = esp32_exception_decoder, colorize
 board_build.filesystem = littlefs
-extra_scripts = post:scripts/extra_script.py
-board_build.embed_files = x509_crt_bundle
+extra_scripts = pre:scripts/pre_script.py, post:scripts/extra_script.py
+board_build.embed_files = 
+  x509_crt_bundle
 build_flags =
   !python scripts/git_rev.py
   -DLAST_BUILD_TIME=$UNIX_TIME
@@ -35,14 +36,13 @@ lib_deps =
     https://github.com/joltwallet/esp_littlefs.git
     bblanchon/ArduinoJson@^7.2.1
     mathieucarbou/ESPAsyncWebServer @ 3.3.23
-    adafruit/Adafruit BusIO@^1.16.2
-    adafruit/Adafruit MCP23017 Arduino Library@^2.3.2
+    robtillaart/MCP23017@^0.8.0
     adafruit/Adafruit NeoPixel@^1.12.3
-    https://github.com/dsbaars/universal_pin
+    https://github.com/dsbaars/universal_pin#feature/mcp23017_rt
     https://github.com/dsbaars/GxEPD2#universal_pin
     https://github.com/tzapu/WiFiManager.git#v2.0.17
     rblb/Nostrduino@1.2.8
-    knolleary/PubSubClient@2.8
+    elims/PsychicMqttClient@^0.2.0
     
 [env:lolin_s3_mini]
 extends = btclock_base
@@ -65,7 +65,7 @@ build_unflags =
 [env:btclock_rev_b]
 extends = btclock_base
 board = btclock_rev_b
-board_build.partitions = partition.csv
+board_build.partitions = partition_8mb.csv
 build_flags =
     ${btclock_base.build_flags}
     -D MCP_INT_PIN=8

scripts/extra_script.py

@@ -5,6 +5,9 @@ from shutil import copyfileobj, rmtree
 from pathlib import Path
 import subprocess
 
+
+
+
 revision = (
     subprocess.check_output(["git", "rev-parse", "HEAD"])
     .strip()
@@ -43,5 +46,15 @@ def before_buildfs(source, target, env):
     output_directory = 'data/build_gz'
     process_directory(input_directory, output_directory)
 
+flash_size = env.BoardConfig().get("upload.flash_size", "4MB")
+fs_image_name = f"littlefs_{flash_size}"
+env.Replace(ESP32_FS_IMAGE_NAME=fs_image_name)
+env.Replace(ESP8266_FS_IMAGE_NAME=fs_image_name)
+
 os.environ["PUBLIC_BASE_URL"] = ""
-env.AddPreAction("$BUILD_DIR/littlefs.bin", before_buildfs)
+fs_name = env.get("ESP32_FS_IMAGE_NAME", "littlefs.bin")
+# Or alternatively:
+# fs_name = env.get("FSTOOLNAME", "littlefs.bin")
+
+# Use the variable in the pre-action
+env.AddPreAction(f"$BUILD_DIR/{fs_name}.bin", before_buildfs)

scripts/pre_script.py

@@ -0,0 +1,7 @@
+Import("env")
+
+flash_size = env.BoardConfig().get("upload.flash_size", "4MB")
+fs_image_name = f"littlefs_{flash_size}"
+env.Replace(ESP32_FS_IMAGE_NAME=fs_image_name)
+env.Replace(ESP8266_FS_IMAGE_NAME=fs_image_name)
+

src/lib/block_notify.cpp

@@ -2,7 +2,7 @@
 
 char *wsServer;
 esp_websocket_client_handle_t blockNotifyClient = NULL;
-uint currentBlockHeight = 860000;
+uint currentBlockHeight = 873400;
 uint blockMedianFee = 1;
 bool blockNotifyInit = false;
 unsigned long int lastBlockUpdate;

src/lib/button_handler.cpp

@@ -5,15 +5,15 @@ const TickType_t debounceDelay = pdMS_TO_TICKS(50);
 TickType_t lastDebounceTime = 0;
 
 #ifdef IS_BTCLOCK_V8
-#define BTN_1 0
-#define BTN_2 1
-#define BTN_3 2
-#define BTN_4 3
+#define BTN_1 256
+#define BTN_2 512
+#define BTN_3 1024
+#define BTN_4 2048
 #else
-#define BTN_1 3
-#define BTN_2 2
-#define BTN_3 1
-#define BTN_4 0
+#define BTN_1 2048
+#define BTN_2 1024
+#define BTN_3 512
+#define BTN_4 256
 #endif
 
 void buttonTask(void *parameter) {
@@ -22,11 +22,12 @@ void buttonTask(void *parameter) {
     std::lock_guard<std::mutex> lock(mcpMutex);
 
     TickType_t currentTime = xTaskGetTickCount();
+
     if ((currentTime - lastDebounceTime) >= debounceDelay) {
       lastDebounceTime = currentTime;
 
       if (!digitalRead(MCP_INT_PIN)) {
-        uint pin = mcp1.getLastInterruptPin();
+        uint pin = mcp1.getInterruptFlagRegister();
 
         switch (pin) {
           case BTN_1:
@@ -43,12 +44,12 @@ void buttonTask(void *parameter) {
             break;
         }
       }
-      mcp1.clearInterrupts();
+      mcp1.getInterruptCaptureRegister();
     } else {
     }
     // Very ugly, but for some reason this is necessary
     while (!digitalRead(MCP_INT_PIN)) {
-      mcp1.clearInterrupts();
+      mcp1.getInterruptCaptureRegister();
     }
   }
 }

src/lib/config.cpp

@@ -2,10 +2,12 @@
 
 #define MAX_ATTEMPTS_WIFI_CONNECTION 20
 
+// zlib_turbo zt;
+
 Preferences preferences;
-Adafruit_MCP23X17 mcp1;
+MCP23017 mcp1(0x20);
 #ifdef IS_BTCLOCK_V8
-Adafruit_MCP23X17 mcp2;
+MCP23017 mcp2(0x21);
 #endif
 
 #ifdef HAS_FRONTLIGHT
@@ -35,7 +37,7 @@ void setup()
   }
   {
     std::lock_guard<std::mutex> lockMcp(mcpMutex);
-    if (mcp1.digitalRead(3) == LOW)
+    if (mcp1.read1(3) == LOW)
     {
       preferences.putBool("wifiConfigured", false);
       preferences.remove("txPower");
@@ -46,7 +48,7 @@ void setup()
   }
 
   {
-    if (mcp1.digitalRead(0) == LOW)
+    if (mcp1.read1(0) == LOW)
     {
       // Then loop forever to prevent anything else from writing to the screen
       while (true)
@@ -54,7 +56,7 @@ void setup()
         delay(1000);
       }
     }
-    else if (mcp1.digitalRead(1) == LOW)
+    else if (mcp1.read1(1) == LOW)
     {
       preferences.clear();
       queueLedEffect(LED_EFFECT_WIFI_ERASE_SETTINGS);
@@ -66,6 +68,7 @@ void setup()
   }
 
   setupWifi();
+  //  loadIcons();
 
   setupWebserver();
 
@@ -92,10 +95,15 @@ void setup()
     setupBitaxeFetchTask();
   }
 
+  if (preferences.getBool("miningPoolStats", DEFAULT_MINING_POOL_STATS_ENABLED))
+  {
+    setupMiningPoolStatsFetchTask();
+  }
+
   if (preferences.getBool("mqttEnabled", DEFAULT_MQTT_ENABLED))
   {
-    setupMqtt();
-    setupMqttTask();
+    if (setupMqtt())
+      setupMqttTask();
   }
 
   setupButtonTask();
@@ -112,6 +120,7 @@ void setup()
 #endif
 
   forceFullRefresh();
+
 }
 
 void setupWifi()
@@ -138,7 +147,7 @@ void setupWifi()
     bool buttonPress = false;
     {
       std::lock_guard<std::mutex> lockMcp(mcpMutex);
-      buttonPress = (mcp1.digitalRead(2) == LOW);
+      buttonPress = (mcp1.read1(2) == LOW);
     }
 
     {
@@ -333,6 +342,14 @@ void setupPreferences()
     addScreenMapping(SCREEN_BITAXE_HASHRATE, "BitAxe Hashrate");
     addScreenMapping(SCREEN_BITAXE_BESTDIFF, "BitAxe Best Difficulty");
   }
+
+  if (preferences.getBool("miningPoolStats", DEFAULT_MINING_POOL_STATS_ENABLED))
+  {
+    addScreenMapping(SCREEN_MINING_POOL_STATS_HASHRATE, "Mining Pool Hashrate");
+    if (getMiningPool()->supportsDailyEarnings()) {
+      addScreenMapping(SCREEN_MINING_POOL_STATS_EARNINGS, "Mining Pool Earnings");
+    }
+  }
 }
 
 String replaceAmbiguousChars(String input)
@@ -513,7 +530,7 @@ void setupHardware()
 
   Wire.begin(I2C_SDA_PIN, I2C_SCK_PIN, 400000);
 
-  if (!mcp1.begin_I2C(0x20))
+  if (!mcp1.begin())
   {
     Serial.println(F("Error MCP23017 1"));
 
@@ -523,17 +540,20 @@ void setupHardware()
   else
   {
     pinMode(MCP_INT_PIN, INPUT_PULLUP);
-    mcp1.setupInterrupts(false, false, LOW);
+//    mcp1.setupInterrupts(false, false, LOW);
+    mcp1.enableControlRegister(MCP23x17_IOCR_ODR);
+
+    mcp1.mirrorInterrupts(true);
 
     for (int i = 0; i < 4; i++)
     {
-      mcp1.pinMode(i, INPUT_PULLUP);
-      mcp1.setupInterruptPin(i, LOW);
+      mcp1.pinMode1(i, INPUT_PULLUP);
+      mcp1.enableInterrupt(i, LOW);
     }
 #ifndef IS_BTCLOCK_V8
     for (int i = 8; i <= 14; i++)
     {
-      mcp1.pinMode(i, OUTPUT);
+      mcp1.pinMode1(i, OUTPUT);
     }
 #endif
   }
@@ -544,7 +564,7 @@ void setupHardware()
 #endif
 
 #ifdef IS_BTCLOCK_V8
-  if (!mcp2.begin_I2C(0x21))
+  if (!mcp2.begin())
   {
     Serial.println(F("Error MCP23017 2"));
 
@@ -796,4 +816,32 @@ const char* getFirmwareFilename() {
     } else {
         return "";
     }
-}
+}
+
+const char* getWebUiFilename() {
+    if (HW_REV == "REV_B_EPD_2_13") {
+        return "littlefs_8MB.bin";
+    } else if (HW_REV == "REV_A_EPD_2_13") {
+        return "littlefs_4MB.bin";
+    } else if (HW_REV == "REV_A_EPD_2_9") {
+        return "littlefs_4MB.bin";
+    } else {
+        return "littlefs_4MB.bin";
+    }
+}
+
+
+// void loadIcons() {
+//   size_t ocean_logo_size = 886;
+
+//   int iUncompSize = zt.gzip_info((uint8_t *)epd_compress_bitaxe, ocean_logo_size);
+//       Serial.printf("uncompressed size = %d\n", iUncompSize);
+
+//   uint8_t *pUncompressed;
+//   pUncompressed = (uint8_t *)malloc(iUncompSize+4);
+//   int rc = zt.gunzip((uint8_t *)epd_compress_bitaxe, ocean_logo_size, pUncompressed);
+
+//    if (rc == ZT_SUCCESS) {
+//     Serial.println("Decode success");
+//    }
+// }

src/lib/config.hpp

@@ -1,6 +1,6 @@
 #pragma once
 
-#include <Adafruit_MCP23X17.h>
+#include <MCP23017.h>
 #include <Arduino.h>
 #include <Preferences.h>
 #include <WiFiClientSecure.h>
@@ -18,6 +18,7 @@
 #include "lib/ota.hpp"
 #include "lib/nostr_notify.hpp"
 #include "lib/bitaxe_fetch.hpp"
+#include "lib/mining_pool_stats_fetch.hpp"
 
 #include "lib/v2_notify.hpp"
 
@@ -84,4 +85,6 @@ void addScreenMapping(int value, const char* name);
 
 int findScreenIndexByValue(int value);
 String replaceAmbiguousChars(String input);
-const char* getFirmwareFilename();
+const char* getFirmwareFilename();
+const char* getWebUiFilename();
+// void loadIcons();

src/lib/defaults.hpp

@@ -45,6 +45,8 @@
 #define DEFAULT_FL_EFFECT_DELAY 15
 
 #define DEFAULT_LUX_LIGHT_TOGGLE 128
+#define DEFAULT_FL_OFF_WHEN_DARK true   
+
 #define DEFAULT_FL_ALWAYS_ON false
 #define DEFAULT_FL_FLASH_ON_UPDATE false
 
@@ -56,8 +58,12 @@
 #define DEFAULT_BITAXE_ENABLED false
 #define DEFAULT_BITAXE_HOSTNAME "bitaxe1"
 
+#define DEFAULT_MINING_POOL_STATS_ENABLED false
+#define DEFAULT_MINING_POOL_NAME "ocean"
+#define DEFAULT_MINING_POOL_USER "38Qkkei3SuF1Eo45BaYmRHUneRD54yyTFy"  // Random actual Ocean hasher
+
 #define DEFAULT_MQTT_ENABLED false
-#define DEFAULT_MQTT_HOST ""
+#define DEFAULT_MQTT_URL ""
 #define DEFAULT_MQTT_ROOTTOPIC "home/"
 
 #define DEFAULT_ZAP_NOTIFY_ENABLED false
@@ -72,3 +78,4 @@
 #define DEFAULT_ACTIVE_CURRENCIES "USD,EUR,JPY"
 
 #define DEFAULT_GIT_RELEASE_URL "https://git.btclock.dev/api/v1/repos/btclock/btclock_v3/releases/latest"
+#define DEFAULT_VERTICAL_DESC true

src/lib/epd.cpp

@@ -191,7 +191,7 @@ void setupDisplays()
   }
 
   // Hold lower button to enable "storage mode" (prevents burn-in of ePaper displays)
-  if (mcp1.digitalRead(0) == LOW)
+  if (mcp1.read1(0) == LOW)
   {
     setFgColor(GxEPD_BLACK);
     setBgColor(GxEPD_WHITE);
@@ -373,7 +373,11 @@ extern "C" void updateDisplay(void *pvParameters) noexcept
 void splitText(const uint dispNum, const String &top, const String &bottom,
                bool partial)
 {
-  displays[dispNum].setRotation(2);
+  if(preferences.getBool("verticalDesc", DEFAULT_VERTICAL_DESC) && dispNum == 0) {
+    displays[dispNum].setRotation(1);
+  } else {
+    displays[dispNum].setRotation(2);
+  }
   displays[dispNum].setFont(&FONT_SMALL);
   displays[dispNum].setTextColor(getFgColor());
 
@@ -600,18 +604,46 @@ void renderIcon(const uint dispNum, const String &text, bool partial)
   displays[dispNum].setTextColor(getFgColor());
 
   uint iconIndex = 0;
+  uint width = 122;
+  uint height = 122;
   if (text.endsWith("rocket"))  {
     iconIndex = 1;
   }
-
-  if (text.endsWith("lnbolt"))  {
+  else if (text.endsWith("lnbolt"))  {
+    iconIndex = 2;
+  }
+  else if (text.endsWith("bitaxe"))  {
+    width = 122;
+    height = 250;
     iconIndex = 3;
   }
+  else if (text.endsWith("miningpool"))  {
+    LogoData logo = getMiningPoolLogo();
+
+    int x_offset = (displays[dispNum].width() - logo.width) / 2;
+    int y_offset = (displays[dispNum].height() - logo.height) / 2;
+    // Close the file
+
+    displays[dispNum].drawInvertedBitmap(x_offset,y_offset, logo.data, logo.width, logo.height, getFgColor());
+    return;
+  }
+
+
+  int x_offset = (displays[dispNum].width() - width) / 2;
+  int y_offset = (displays[dispNum].height() - height) / 2;
+ 
+
+  displays[dispNum].drawInvertedBitmap(x_offset,y_offset, epd_icons_allArray[iconIndex], width, height, getFgColor());
+
+
+//  displays[dispNum].drawInvertedBitmap(0,0, getOceanIcon(), 122, 250, getFgColor());
 
-  displays[dispNum].drawInvertedBitmap(0,0, epd_icons_allArray[iconIndex], 122, 250, getFgColor());
 
 }
 
+
+
+
 void renderQr(const uint dispNum, const String &text, bool partial)
 {
 #ifdef USE_QR

src/lib/epd.hpp

@@ -4,6 +4,7 @@
 #include <Fonts/FreeSansBold9pt7b.h>
 #include <GxEPD2_BW.h>
 
+
 #include <mcp23x17_pin.hpp>
 #include <mutex>
 #include <native_pin.hpp>
@@ -13,6 +14,7 @@
 #include "lib/config.hpp"
 #include "lib/shared.hpp"
 #include "icons/icons.h"
+#include "mining_pool_stats_fetch.hpp"
 
 #ifdef USE_QR
 #include "qrcodegen.h"

src/lib/mining_pool/braiins/brains_pool.cpp

@@ -0,0 +1,32 @@
+#include "brains_pool.hpp"
+
+void BraiinsPool::prepareRequest(HTTPClient& http) const {
+    http.addHeader("Pool-Auth-Token", poolUser.c_str());
+}
+
+std::string BraiinsPool::getApiUrl() const {
+    return "https://pool.braiins.com/accounts/profile/json/btc/";
+}
+
+PoolStats BraiinsPool::parseResponse(const JsonDocument &doc) const
+{
+    std::string unit = doc["btc"]["hash_rate_unit"].as<std::string>();
+
+    static const std::unordered_map<std::string, int> multipliers = {
+        {"Zh/s", 21}, {"Eh/s", 18}, {"Ph/s", 15}, {"Th/s", 12}, {"Gh/s", 9}, {"Mh/s", 6}, {"Kh/s", 3}};
+
+    int multiplier = multipliers.at(unit);
+    float hashValue = doc["btc"]["hash_rate_5m"].as<float>();
+
+    return PoolStats{
+        .hashrate = std::to_string(static_cast<int>(std::round(hashValue))) + std::string(multiplier, '0'),
+        .dailyEarnings = static_cast<int64_t>(doc["btc"]["today_reward"].as<float>() * 100000000)};
+}
+
+LogoData BraiinsPool::getLogo() const {
+    return LogoData{
+        .data = epd_icons_allArray[5],
+        .width = 122,
+        .height = 250
+    };
+}

src/lib/mining_pool/braiins/brains_pool.hpp

@@ -0,0 +1,20 @@
+#pragma once
+
+#include "lib/mining_pool/mining_pool_interface.hpp"
+#include <icons/icons.h>
+
+class BraiinsPool : public MiningPoolInterface
+{
+public:
+    void setPoolUser(const std::string &user) override { poolUser = user; }
+    void prepareRequest(HTTPClient &http) const override;
+    std::string getApiUrl() const override;
+    PoolStats parseResponse(const JsonDocument &doc) const override;
+    LogoData getLogo() const override;
+    bool supportsDailyEarnings() const override { return true; }
+    bool hasLogo() const override { return true; }
+    std::string getDisplayLabel() const override { return "BRAIINS/POOL"; } // Fallback if needed
+    std::string getDailyEarningsLabel() const override { return "sats/earned"; }
+private:
+    static int getHashrateMultiplier(const std::string &unit);
+};

src/lib/mining_pool/gobrrr_pool/gobrrr_pool.cpp

@@ -0,0 +1,14 @@
+// src/noderunners/noderunners_pool.cpp
+#include "gobrrr_pool.hpp"
+
+std::string GoBrrrPool::getApiUrl() const {
+    return "https://pool.gobrrr.me/api/client/" + poolUser;
+}
+
+LogoData GoBrrrPool::getLogo() const {
+    return LogoData {
+        .data = epd_icons_allArray[7],
+        .width = 122,
+        .height = 122
+    };
+}

src/lib/mining_pool/gobrrr_pool/gobrrr_pool.hpp

@@ -0,0 +1,15 @@
+
+#pragma once
+
+#include "lib/mining_pool/mining_pool_interface.hpp"
+#include "lib/mining_pool/public_pool/public_pool.hpp"
+
+#include <icons/icons.h>
+
+class GoBrrrPool : public PublicPool {
+public:
+    std::string getApiUrl() const override;
+    bool hasLogo() const override { return true; }
+    std::string getDisplayLabel() const override { return "GOBRRR/POOL"; }
+    LogoData getLogo() const override;
+};

src/lib/mining_pool/logo_data.hpp

@@ -0,0 +1,10 @@
+#pragma once
+
+#include <cstdint>
+#include <stddef.h>
+
+struct LogoData {
+    const uint8_t* data;
+    size_t width;
+    size_t height;
+};

src/lib/mining_pool/mining_pool_interface.hpp

@@ -0,0 +1,23 @@
+#pragma once
+
+#include <HTTPClient.h>
+#include <ArduinoJson.h>
+#include "pool_stats.hpp"
+#include "logo_data.hpp"
+
+class MiningPoolInterface {
+public:
+    virtual ~MiningPoolInterface() = default;
+    virtual void setPoolUser(const std::string& user) = 0;
+    virtual void prepareRequest(HTTPClient& http) const = 0;
+    virtual std::string getApiUrl() const = 0;
+    virtual PoolStats parseResponse(const JsonDocument& doc) const = 0;
+    virtual bool hasLogo() const = 0;
+    virtual LogoData getLogo() const = 0;
+    virtual std::string getDisplayLabel() const = 0;
+    virtual bool supportsDailyEarnings() const = 0;
+    virtual std::string getDailyEarningsLabel() const = 0;
+
+protected:
+    std::string poolUser;
+};

src/lib/mining_pool/mining_pool_stats_handler.cpp

@@ -0,0 +1,122 @@
+#include "mining_pool_stats_handler.hpp"
+#include <iostream>
+
+std::array<std::string, NUM_SCREENS> parseMiningPoolStatsHashRate(std::string text, const MiningPoolInterface& pool)
+{
+    std::array<std::string, NUM_SCREENS> ret;
+    ret.fill(""); // Initialize all elements to empty strings
+    std::string hashrate;
+    std::string label;
+
+    if (text.length() > 21) {
+        // We are massively future-proof!!
+        label = "ZH/S";
+        hashrate = text.substr(0, text.length() - 21);
+    } else if (text.length() > 18) {
+        label = "EH/S";
+        hashrate = text.substr(0, text.length() - 18);
+    } else if (text.length() > 15) {
+        label = "PH/S";
+        hashrate = text.substr(0, text.length() - 15);
+    } else if (text.length() > 12) {
+        label = "TH/S";
+        hashrate = text.substr(0, text.length() - 12);
+    } else if (text.length() > 9) {
+        label = "GH/S";
+        hashrate = text.substr(0, text.length() - 9);
+    } else if (text.length() > 6) {
+        label = "MH/S";
+        hashrate = text.substr(0, text.length() - 6);
+    } else if (text.length() > 3) {
+        label = "KH/S";
+        hashrate = text.substr(0, text.length() - 3);
+    } else {
+        label = "H/S";
+        hashrate = text;
+    }
+
+    std::size_t textLength = hashrate.length();
+
+    // Calculate the position where the digits should start
+    // Account for the position of the mining pool logo and the hashrate label
+    std::size_t startIndex = NUM_SCREENS - 1 - textLength;
+
+    // Insert the pickaxe icon just before the digits
+    if (startIndex > 0)
+    {
+        ret[startIndex - 1] = "mdi:pickaxe";
+    }
+
+    // Place the digits
+    for (std::size_t i = 0; i < textLength; ++i)
+    {
+        ret[startIndex + i] = hashrate.substr(i, 1);
+    }
+
+    ret[NUM_SCREENS - 1] = label;
+
+    if (pool.hasLogo()) {
+        ret[0] = "mdi:miningpool";
+    } else {
+        ret[0] = pool.getDisplayLabel();
+    }
+   
+
+    return ret;
+}
+
+
+std::array<std::string, NUM_SCREENS> parseMiningPoolStatsDailyEarnings(int sats, std::string label, const MiningPoolInterface& pool)
+{
+    std::array<std::string, NUM_SCREENS> ret;
+    ret.fill(""); // Initialize all elements to empty strings
+    std::string satsDisplay = std::to_string(sats);
+
+    if (sats >= 100000000) {
+        // A whale mining 1+ BTC per day! No decimal points; whales scoff at such things.
+        label = "BTC" + label.substr(4);
+        satsDisplay = satsDisplay.substr(0, satsDisplay.length() - 8);
+    } else if (sats >= 10000000) {
+        // 10.0M to 99.9M you get one decimal point
+        satsDisplay = satsDisplay.substr(0, satsDisplay.length() - 6) + "." + satsDisplay[2] + "M";
+    } else if (sats >= 1000000) {
+        // 1.00M to 9.99M you get two decimal points
+        satsDisplay = satsDisplay.substr(0, satsDisplay.length() - 6) + "." + satsDisplay.substr(2, 2) + "M";
+    } else if (sats >= 100000) {
+        // 100K to 999K you get no extra precision
+        satsDisplay = satsDisplay.substr(0, satsDisplay.length() - 3) + "K";
+    } else if (sats >= 10000) {
+        // 10.0K to 99.9K you get one decimal point
+        satsDisplay = satsDisplay.substr(0, satsDisplay.length() - 3) + "." + satsDisplay[2] + "K";
+    } else {
+        // Pleb miner! 4 digit or fewer sats will fit as-is. no-op.
+    }
+
+    std::size_t textLength = satsDisplay.length();
+
+    // Calculate the position where the digits should start
+    // Account for the position of the mining pool logo
+    std::size_t startIndex = NUM_SCREENS - 1 - textLength;
+
+    // Insert the pickaxe icon just before the digits if there's room
+    if (startIndex > 0)
+    {
+        ret[startIndex - 1] = "mdi:pickaxe";
+    }
+
+    // Place the digits
+    for (std::size_t i = 0; i < textLength; ++i)
+    {
+        ret[startIndex + i] = satsDisplay.substr(i, 1);
+    }
+
+    ret[NUM_SCREENS - 1] = label;
+
+    if (pool.hasLogo()) {
+        ret[0] = "mdi:miningpool";
+    } else {
+        ret[0] = pool.getDisplayLabel();
+    }
+
+    return ret;
+}

src/lib/mining_pool/mining_pool_stats_handler.hpp

@@ -0,0 +1,8 @@
+#include <array>
+#include <string>
+#ifndef UNITY_TEST
+#include "lib/mining_pool/mining_pool_interface.hpp"
+#endif
+
+std::array<std::string, NUM_SCREENS> parseMiningPoolStatsHashRate(std::string text, const MiningPoolInterface& pool);
+std::array<std::string, NUM_SCREENS> parseMiningPoolStatsDailyEarnings(int sats, std::string label, const MiningPoolInterface& pool);

src/lib/mining_pool/noderunners/noderunners_pool.cpp

@@ -0,0 +1,42 @@
+// src/noderunners/noderunners_pool.cpp
+#include "noderunners_pool.hpp"
+
+void NoderunnersPool::prepareRequest(HTTPClient& http) const {
+    // Empty as NodeRunners doesn't need special headers
+}
+
+std::string NoderunnersPool::getApiUrl() const {
+    return "https://pool.noderunners.network/api/v1/users/" + poolUser;
+}
+
+PoolStats NoderunnersPool::parseResponse(const JsonDocument& doc) const {
+    std::string hashrateStr = doc["hashrate1m"].as<std::string>();
+    char unit = hashrateStr.back();
+    std::string value = hashrateStr.substr(0, hashrateStr.size() - 1);
+    
+    int multiplier = getHashrateMultiplier(unit);
+    
+    return PoolStats{
+        .hashrate = value + std::string(multiplier, '0'),
+        .dailyEarnings = std::nullopt
+    };
+}
+
+LogoData NoderunnersPool::getLogo() const {
+    return LogoData {
+        .data = epd_icons_allArray[6],
+        .width = 122,
+        .height = 122
+    };
+}
+
+int NoderunnersPool::getHashrateMultiplier(char unit) {
+    if (unit == '0')
+        return 0;
+
+    static const std::unordered_map<char, int> multipliers = {
+        {'Z', 21}, {'E', 18}, {'P', 15}, {'T', 12},
+        {'G', 9},  {'M', 6},  {'K', 3}
+    };
+    return multipliers.at(unit);
+}

src/lib/mining_pool/noderunners/noderunners_pool.hpp

@@ -0,0 +1,22 @@
+
+#pragma once
+
+#include "lib/mining_pool/mining_pool_interface.hpp"
+#include <icons/icons.h>
+
+class NoderunnersPool : public MiningPoolInterface {
+public:
+    void setPoolUser(const std::string& user) override { poolUser = user; }
+
+    void prepareRequest(HTTPClient& http) const override;
+    std::string getApiUrl() const override;
+    PoolStats parseResponse(const JsonDocument& doc) const override;
+    LogoData getLogo() const override;
+    bool supportsDailyEarnings() const override { return false; }
+    std::string getDailyEarningsLabel() const override { return ""; }
+    bool hasLogo() const override { return true; }
+    std::string getDisplayLabel() const override { return "NODE/RUNNERS"; } // Fallback if needed
+
+protected:
+    static int getHashrateMultiplier(char unit);
+};

src/lib/mining_pool/ocean/ocean_pool.cpp

@@ -0,0 +1,26 @@
+#include "ocean_pool.hpp"
+
+void OceanPool::prepareRequest(HTTPClient& http) const {
+    // Empty as Ocean doesn't need special headers
+}
+
+std::string OceanPool::getApiUrl() const {
+    return "https://api.ocean.xyz/v1/statsnap/" + poolUser;
+}
+
+PoolStats OceanPool::parseResponse(const JsonDocument& doc) const {
+    return PoolStats{
+        .hashrate = doc["result"]["hashrate_300s"].as<std::string>(),
+        .dailyEarnings = static_cast<int64_t>(
+            doc["result"]["estimated_earn_next_block"].as<float>() * 100000000
+        )
+    };
+}
+
+LogoData OceanPool::getLogo() const {
+    return LogoData{
+        .data = epd_icons_allArray[4],
+        .width = 122,
+        .height = 122
+    };
+}

src/lib/mining_pool/ocean/ocean_pool.hpp

@@ -0,0 +1,18 @@
+#pragma once
+
+#include "lib/mining_pool/mining_pool_interface.hpp"
+#include <icons/icons.h>
+
+class OceanPool : public MiningPoolInterface {
+public:
+    void setPoolUser(const std::string& user) override { poolUser = user; }
+    void prepareRequest(HTTPClient& http) const override;
+    std::string getApiUrl() const override;
+    PoolStats parseResponse(const JsonDocument& doc) const override;
+    LogoData getLogo() const override;
+    bool hasLogo() const override { return true; }
+    std::string getDisplayLabel() const override { return "OCEAN/POOL"; } // Fallback if needed
+    bool supportsDailyEarnings() const override { return true; }
+    std::string getDailyEarningsLabel() const override { return "sats/block"; }
+    
+};

src/lib/mining_pool/pool_factory.cpp

@@ -0,0 +1,25 @@
+#include "pool_factory.hpp"
+
+const char* PoolFactory::MINING_POOL_NAME_OCEAN = "ocean";
+const char* PoolFactory::MINING_POOL_NAME_NODERUNNERS = "noderunners";
+const char* PoolFactory::MINING_POOL_NAME_BRAIINS = "braiins";
+const char* PoolFactory::MINING_POOL_NAME_SATOSHI_RADIO = "satoshi_radio";
+const char* PoolFactory::MINING_POOL_NAME_PUBLIC_POOL = "public_pool";
+const char* PoolFactory::MINING_POOL_NAME_GOBRRR_POOL = "gobrrr_pool";
+
+std::unique_ptr<MiningPoolInterface> PoolFactory::createPool(const std::string& poolName) {
+    static const std::unordered_map<std::string, std::function<std::unique_ptr<MiningPoolInterface>()>> poolFactories = {
+        {MINING_POOL_NAME_OCEAN, []() { return std::make_unique<OceanPool>(); }},
+        {MINING_POOL_NAME_NODERUNNERS, []() { return std::make_unique<NoderunnersPool>(); }},
+        {MINING_POOL_NAME_BRAIINS, []() { return std::make_unique<BraiinsPool>(); }},
+        {MINING_POOL_NAME_SATOSHI_RADIO, []() { return std::make_unique<SatoshiRadioPool>(); }},
+        {MINING_POOL_NAME_PUBLIC_POOL, []() { return std::make_unique<PublicPool>(); }},
+        {MINING_POOL_NAME_GOBRRR_POOL, []() { return std::make_unique<GoBrrrPool>(); }}
+    };
+    
+    auto it = poolFactories.find(poolName);
+    if (it == poolFactories.end()) {
+        return nullptr;
+    }
+    return it->second();
+}

src/lib/mining_pool/pool_factory.hpp

@@ -0,0 +1,44 @@
+#pragma once
+#include "mining_pool_interface.hpp"
+#include <memory>
+#include <string>
+#include "noderunners/noderunners_pool.hpp"
+#include "braiins/brains_pool.hpp"
+#include "ocean/ocean_pool.hpp"
+#include "satoshi_radio/satoshi_radio_pool.hpp"
+#include "public_pool/public_pool.hpp"
+#include "gobrrr_pool/gobrrr_pool.hpp"
+
+class PoolFactory {
+    public:
+        static std::unique_ptr<MiningPoolInterface> createPool(const std::string& poolName);
+        static std::vector<std::string> getAvailablePools() {
+        return {
+            MINING_POOL_NAME_OCEAN,
+            MINING_POOL_NAME_NODERUNNERS,
+            MINING_POOL_NAME_SATOSHI_RADIO,
+            MINING_POOL_NAME_BRAIINS,
+            MINING_POOL_NAME_PUBLIC_POOL,
+            MINING_POOL_NAME_GOBRRR_POOL
+        };
+    }
+    
+    static std::string getAvailablePoolsAsString() {
+        const auto pools = getAvailablePools();
+        std::string result;
+        for (size_t i = 0; i < pools.size(); ++i) {
+            result += pools[i];
+            if (i < pools.size() - 1) {
+                result += ", ";
+            }
+        }
+        return result;
+    }
+    private:
+        static const char* MINING_POOL_NAME_OCEAN;
+        static const char* MINING_POOL_NAME_NODERUNNERS;
+        static const char* MINING_POOL_NAME_BRAIINS;
+        static const char* MINING_POOL_NAME_SATOSHI_RADIO;
+        static const char* MINING_POOL_NAME_PUBLIC_POOL;
+        static const char* MINING_POOL_NAME_GOBRRR_POOL;
+};

src/lib/mining_pool/pool_stats.hpp

@@ -0,0 +1,10 @@
+
+#pragma once
+
+#include <string>
+#include <optional>
+
+struct PoolStats {
+    std::string hashrate;
+    std::optional<int64_t> dailyEarnings;
+};

src/lib/mining_pool/public_pool/public_pool.cpp

@@ -0,0 +1,21 @@
+// src/noderunners/noderunners_pool.cpp
+#include "public_pool.hpp"
+
+std::string PublicPool::getApiUrl() const {
+    return "https://public-pool.io:40557/api/client/" + poolUser;
+}
+
+PoolStats PublicPool::parseResponse(const JsonDocument& doc) const {
+    uint64_t totalHashrate = 0;
+    
+    for (JsonVariantConst worker : doc["workers"].as<JsonArrayConst>()) {
+        totalHashrate +=  static_cast<uint64_t>(std::llround(worker["hashRate"].as<double>()));
+    }
+
+  
+
+    return PoolStats{
+        .hashrate = std::to_string(totalHashrate),
+        .dailyEarnings = std::nullopt  // Public Pool doesn't support daily earnings
+    };
+}

src/lib/mining_pool/public_pool/public_pool.hpp

@@ -0,0 +1,15 @@
+
+#pragma once
+
+#include "lib/mining_pool/mining_pool_interface.hpp"
+#include "lib/mining_pool/noderunners/noderunners_pool.hpp"
+
+#include <icons/icons.h>
+
+class PublicPool : public NoderunnersPool {
+public:
+    std::string getApiUrl() const override;
+    bool hasLogo() const override { return false; }
+    std::string getDisplayLabel() const override { return "PUBLIC/POOL"; }
+    PoolStats parseResponse(const JsonDocument& doc) const override;
+};

src/lib/mining_pool/satoshi_radio/satoshi_radio_pool.cpp

@@ -0,0 +1,6 @@
+// src/noderunners/noderunners_pool.cpp
+#include "satoshi_radio_pool.hpp"
+
+std::string SatoshiRadioPool::getApiUrl() const {
+    return "https://pool.satoshiradio.nl/api/v1/users/" + poolUser;
+}

src/lib/mining_pool/satoshi_radio/satoshi_radio_pool.hpp

@@ -0,0 +1,14 @@
+
+#pragma once
+
+#include "lib/mining_pool/mining_pool_interface.hpp"
+#include "lib/mining_pool/noderunners/noderunners_pool.hpp"
+
+#include <icons/icons.h>
+
+class SatoshiRadioPool : public NoderunnersPool {
+public:
+    std::string getApiUrl() const override;
+    bool hasLogo() const override { return false; }
+    std::string getDisplayLabel() const override { return "SATOSHI/RADIO"; } // Fallback if needed
+};

src/lib/mining_pool_stats_fetch.cpp

@@ -0,0 +1,99 @@
+#include "mining_pool_stats_fetch.hpp"
+
+TaskHandle_t miningPoolStatsFetchTaskHandle;
+
+std::string miningPoolName;
+std::string miningPoolStatsHashrate;
+int miningPoolStatsDailyEarnings;
+
+std::string getMiningPoolStatsHashRate()
+{
+    return miningPoolStatsHashrate;
+}
+
+int getMiningPoolStatsDailyEarnings()
+{
+    return miningPoolStatsDailyEarnings;
+}
+
+void taskMiningPoolStatsFetch(void *pvParameters)
+{
+    for (;;)
+    {
+        ulTaskNotifyTake(pdTRUE, portMAX_DELAY);
+
+        HTTPClient http;
+        http.setUserAgent(USER_AGENT);
+
+        std::string poolName = preferences.getString("miningPoolName", DEFAULT_MINING_POOL_NAME).c_str();
+        std::string poolUser = preferences.getString("miningPoolUser", DEFAULT_MINING_POOL_USER).c_str();
+
+        auto poolInterface = PoolFactory::createPool(poolName);
+        if (!poolInterface)
+        {
+            Serial.println("Unknown mining pool: \"" + String(poolName.c_str()) + "\"");
+            continue;
+        }
+
+        poolInterface->setPoolUser(poolUser);
+        std::string apiUrl = poolInterface->getApiUrl();
+        http.begin(apiUrl.c_str());
+        poolInterface->prepareRequest(http);
+        int httpCode = http.GET();
+        if (httpCode == 200)
+        {
+            String payload = http.getString();
+            JsonDocument doc;
+            deserializeJson(doc, payload);
+
+            PoolStats stats = poolInterface->parseResponse(doc);
+            miningPoolStatsHashrate = stats.hashrate;
+
+            if (stats.dailyEarnings)
+            {
+                miningPoolStatsDailyEarnings = *stats.dailyEarnings;
+            }
+            else
+            {
+                miningPoolStatsDailyEarnings = 0; // or any other default value
+            }
+
+            if (workQueue != nullptr && (getCurrentScreen() == SCREEN_MINING_POOL_STATS_HASHRATE || getCurrentScreen() == SCREEN_MINING_POOL_STATS_EARNINGS))
+            {
+                WorkItem priceUpdate = {TASK_MINING_POOL_STATS_UPDATE, 0};
+                xQueueSend(workQueue, &priceUpdate, portMAX_DELAY);
+            }
+        }
+        else
+        {
+            Serial.print(
+                F("Error retrieving mining pool data. HTTP status code: "));
+            Serial.println(httpCode);
+        }
+    }
+}
+
+void setupMiningPoolStatsFetchTask()
+{
+    xTaskCreate(taskMiningPoolStatsFetch, "miningPoolStatsFetch", (6 * 1024), NULL, tskIDLE_PRIORITY,
+                &miningPoolStatsFetchTaskHandle);
+
+    xTaskNotifyGive(miningPoolStatsFetchTaskHandle);
+}
+
+std::unique_ptr<MiningPoolInterface>& getMiningPool()
+{
+   static std::unique_ptr<MiningPoolInterface> currentMiningPool;
+    
+    if (!currentMiningPool) {
+        std::string poolName = preferences.getString("miningPoolName", DEFAULT_MINING_POOL_NAME).c_str();
+        currentMiningPool = PoolFactory::createPool(poolName);
+    }
+
+    return currentMiningPool;
+}
+
+LogoData getMiningPoolLogo()
+{
+    return getMiningPool()->getLogo();
+}

src/lib/mining_pool_stats_fetch.hpp

@@ -0,0 +1,19 @@
+#pragma once
+
+#include <Arduino.h>
+#include <HTTPClient.h>
+#include "mining_pool/pool_factory.hpp"
+
+#include "lib/config.hpp"
+#include "lib/shared.hpp"
+
+extern TaskHandle_t miningPoolStatsFetchTaskHandle;
+
+void setupMiningPoolStatsFetchTask();
+void taskMiningPoolStatsFetch(void *pvParameters);
+
+std::string getMiningPoolStatsHashRate();
+int getMiningPoolStatsDailyEarnings();
+
+std::unique_ptr<MiningPoolInterface>& getMiningPool();
+LogoData getMiningPoolLogo();

src/lib/mqtt.cpp

@@ -2,8 +2,9 @@
 
 TaskHandle_t mqttTaskHandle = NULL;
 
-WiFiClient wifiClient;
-PubSubClient client(wifiClient);
+// WiFiClient wifiClient;
+//PubSubClient client(wifiClient);
+PsychicMqttClient mqttClient;
 
 // avoid circular deps, just forward declare externs used here.
 #ifdef HAS_FRONTLIGHT
@@ -27,43 +28,46 @@ const String getDeviceTopic()
         fullTopic += "/";
     }
     fullTopic += hostname + "/";
+
     return String(fullTopic);
 }
 
-boolean connectMqtt()
+// boolean connectMqtt()
+// {
+//     const String willTopic = getDeviceTopic() + "status";
+//     mqttClient.connect()
+//     boolean result = client.connect("btclockClient", willTopic.c_str(), 0, true, "offline");
+//     if (!result)
+//     {
+//         Serial.println("[MQTT] could not connect");
+//         return result;
+//     }
+//     publish("status", "online", true);
+//     return result;
+// }
+
+boolean setupMqtt()
 {
+    const String url = preferences.getString("mqttUrl", DEFAULT_MQTT_URL);
+    if (url == "")
+    {
+        Serial.println("[MQTT] url not set");
+        return false;
+    }
+    Serial.print("[MQTT] url: ");
+    Serial.println(url.c_str());
+
+    mqttClient.setClientId(getMyHostname().c_str());
+    mqttClient.setServer(url.c_str());
+    // if (url.startsWith("mqtts:") || url.startsWith("wss:"))
+    //     mqttClient.attachArduinoCACertBundle();
+    mqttClient.connect();
+
     const String willTopic = getDeviceTopic() + "status";
-    boolean result = client.connect("btclockClient", willTopic.c_str(), 0, true, "offline");
-    if (!result)
-    {
-        Serial.println("[MQTT] could not connect");
-        return result;
-    }
+    mqttClient.setWill(willTopic.c_str(), 0, 1, "offline");
     publish("status", "online", true);
-    return result;
-}
 
-void setupMqtt()
-{
-    const String host = preferences.getString("mqttHost", DEFAULT_MQTT_HOST);
-    if (host == "")
-    {
-        Serial.println("[MQTT] host not set");
-        return;
-    }
-    Serial.print("[MQTT] host: ");
-    Serial.println(host.c_str());
-
-    IPAddress addr((uint32_t)0);
-    if(!WiFi.hostByName(host.c_str(), addr))
-    {
-        Serial.println("[MQTT] host lookup fail");
-        return;
-    }
-    client.setServer(addr, 1883);
-    client.setCallback(onMqttCallback);
-
-    connectMqtt();
+    return true;
 }
 
 void mqttTask(void *pvParameters)
@@ -71,17 +75,10 @@ void mqttTask(void *pvParameters)
     int t=0;
     while (1)
     {
-        client.loop();
+        // client.loop();
         vTaskDelay(pdMS_TO_TICKS(1000));
         if (t++ % 10 == 0)
         {
-            if (!client.connected())
-            {
-                // reconnect
-                if (!connectMqtt())
-                    continue;
-            }
-
 #ifdef HAS_FRONTLIGHT
             if (hasLightLevel())
             {
@@ -109,22 +106,25 @@ void setupMqttTask()
     xTaskCreate(mqttTask, "mqttTask", 8192, NULL, 10, &mqttTaskHandle);
 }
 
-void publish(const char *topic, const char *value)
+void publishForDevice(const char *topic, const char *payload)
 {
-    publish(topic, value, false);
+    publishForDevice(topic, payload, false);
 }
 
-void publish(const char *topic, const char *value, boolean retain)
+void publishForDevice(const char *topic, const char *payload, boolean retain)
 {
-    if (!client.connected())
-    {
-        Serial.println("[MQTT] not connected");
-        return;
-    }
-
     const String fullTopic = getDeviceTopic() + topic;
+    publish(fullTopic.c_str(), payload, retain);
+}
 
-    if (!client.publish(fullTopic.c_str(), value, retain))
+void publish(const char *topic, const char *payload)
+{
+    publish(topic, payload, false);
+}
+
+void publish(const char *topic, const char *payload, boolean retain)
+{
+    if (!mqttClient.publish(topic, 0, retain, payload))
     {
         Serial.println("[MQTT] could not write");
     }

src/lib/mqtt.hpp

@@ -1,10 +1,13 @@
 #pragma once
 
 #include <Arduino.h>
+#include <WiFiClientSecure.h>
+#include <PsychicMqttClient.h>
 #include "lib/shared.hpp"
-#include "PubSubClient.h"
 
-void setupMqtt();
+boolean setupMqtt();
 void setupMqttTask();
-void publish(const char *topic, const char *value);
-void publish(const char *topic, const char *value, boolean retain);
+void publishForDevice(const char *topic, const char *payload);
+void publishForDevice(const char *topic, const char *payload, boolean retain);
+void publish(const char *topic, const char *payload);
+void publish(const char *topic, const char *payload, boolean retain);

src/lib/ota.cpp

@@ -171,14 +171,13 @@ int downloadUpdateHandler(char updateType)
   break;
   case UPDATE_WEBUI:
   {
-    latestRelease = getLatestRelease("littlefs.bin");
+    latestRelease = getLatestRelease(getWebUiFilename());
     // updateWebUi(latestRelease.fileUrl, U_SPIFFS);
     // return 0;
   }
   break;
   }
 
-
   // First, download the expected SHA256
   String expectedSHA256 = downloadSHA256(latestRelease.checksumUrl);
   if (expectedSHA256.isEmpty())

src/lib/price_notify.cpp

@@ -8,7 +8,7 @@ const char *wsServerPrice = "wss://ws.coincap.io/prices?assets=bitcoin";
 // WebsocketsClient client;
 esp_websocket_client_handle_t clientPrice = NULL;
 esp_websocket_client_config_t config;
-uint currentPrice = 50000;
+uint currentPrice = 90000;
 unsigned long int lastPriceUpdate;
 bool priceNotifyInit = false;
 std::map<char, std::uint64_t> currencyMap;

src/lib/screen_handler.cpp

@@ -33,9 +33,19 @@ void workerTask(void *pvParameters) {
                 parseBitaxeBestDiff(getBitaxeBestDiff());
           }
           setEpdContent(taskEpdContent);
-
+          break;
+        }
+        case TASK_MINING_POOL_STATS_UPDATE: {
+          if (getCurrentScreen() == SCREEN_MINING_POOL_STATS_HASHRATE) {
+          taskEpdContent =
+                parseMiningPoolStatsHashRate(getMiningPoolStatsHashRate(), *getMiningPool());
+          } else if (getCurrentScreen() == SCREEN_MINING_POOL_STATS_EARNINGS) {
+          taskEpdContent =
+                parseMiningPoolStatsDailyEarnings(getMiningPoolStatsDailyEarnings(), getMiningPool()->getDailyEarningsLabel(), *getMiningPool());
+          }
+          setEpdContent(taskEpdContent);
+          break;
         }
-        break;
         case TASK_PRICE_UPDATE: {
           uint currency = getCurrentCurrency();
           uint price = getPrice(currency);
@@ -179,6 +189,17 @@ void setCurrentScreen(uint newScreen) {
         return;
       }
       break;
+    }
+	  case SCREEN_MINING_POOL_STATS_HASHRATE:
+	  case SCREEN_MINING_POOL_STATS_EARNINGS: {
+      if (preferences.getBool("miningPoolStats", DEFAULT_MINING_POOL_STATS_ENABLED)) {
+        WorkItem miningPoolStatsUpdate = {TASK_MINING_POOL_STATS_UPDATE, 0};
+        xQueueSend(workQueue, &miningPoolStatsUpdate, portMAX_DELAY);
+      } else {
+        setCurrentScreen(SCREEN_BLOCK_HEIGHT);
+        return;
+      }
+      break;
     }
   }
 

src/lib/screen_handler.hpp

@@ -6,6 +6,7 @@
 
 #include <data_handler.hpp>
 #include <bitaxe_handler.hpp>
+#include "lib/mining_pool/mining_pool_stats_handler.hpp"
 
 #include "lib/epd.hpp"
 #include "lib/shared.hpp"
@@ -23,7 +24,8 @@ typedef enum {
   TASK_BLOCK_UPDATE,
   TASK_FEE_UPDATE,
   TASK_TIME_UPDATE,
-  TASK_BITAXE_UPDATE
+  TASK_BITAXE_UPDATE,
+  TASK_MINING_POOL_STATS_UPDATE
 } TaskType;
 
 typedef struct {

src/lib/shared.cpp

@@ -143,4 +143,12 @@ String calculateSHA256(WiFiClient *stream, size_t contentLength) {
   }
   
   return result;
-}
+}
+
+// uint8_t* getOceanIcon() {
+//   zlib_turbo zt;
+//   int iUncompSize = zt.gzip_info((uint8_t *)ocean_logo_comp, ocean_logo_size);
+//   uint8_t *pUncompressed;
+//   pUncompressed = (uint8_t *)malloc(iUncompSize+4);
+//   zt.gunzip((uint8_t *)ocean_logo_comp, ocean_logo_size, pUncompressed);
+// }

src/lib/shared.hpp

@@ -1,6 +1,7 @@
 #pragma once
 
-#include <Adafruit_MCP23X17.h>
+#include "MCP23017.h"
+// #include <zlib_turbo.h>
 #include <ArduinoJson.h>
 #include <WiFiClientSecure.h>
 #include <Preferences.h>
@@ -17,9 +18,9 @@
 
 #include "defaults.hpp"
 
-extern Adafruit_MCP23X17 mcp1;
+extern MCP23017 mcp1;
 #ifdef IS_BTCLOCK_V8
-extern Adafruit_MCP23X17 mcp2;
+extern MCP23017 mcp2;
 #endif
 extern Preferences preferences;
 extern std::mutex mcpMutex;
@@ -41,24 +42,16 @@ const PROGMEM int SCREEN_BLOCK_FEE_RATE = 6;
 const PROGMEM int SCREEN_SATS_PER_CURRENCY = 10;
 
 const PROGMEM int SCREEN_BTC_TICKER = 20;
-// const PROGMEM int SCREEN_BTC_TICKER_USD = 20;
-// const PROGMEM int SCREEN_BTC_TICKER_EUR = 21;
-// const PROGMEM int SCREEN_BTC_TICKER_GBP = 22;
-// const PROGMEM int SCREEN_BTC_TICKER_JPY = 23;
-// const PROGMEM int SCREEN_BTC_TICKER_AUD = 24;
-// const PROGMEM int SCREEN_BTC_TICKER_CAD = 25;
 
 const PROGMEM int SCREEN_MARKET_CAP = 30;
-// const PROGMEM int SCREEN_MARKET_CAP_USD = 30;
-// const PROGMEM int SCREEN_MARKET_CAP_EUR = 31;
-// const PROGMEM int SCREEN_MARKET_CAP_GBP = 32;
-// const PROGMEM int SCREEN_MARKET_CAP_JPY = 33;
-// const PROGMEM int SCREEN_MARKET_CAP_AUD = 34;
-// const PROGMEM int SCREEN_MARKET_CAP_CAD = 35;
+
+const PROGMEM int SCREEN_MINING_POOL_STATS_HASHRATE = 70;
+const PROGMEM int SCREEN_MINING_POOL_STATS_EARNINGS = 71;
 
 const PROGMEM int SCREEN_BITAXE_HASHRATE = 80;
 const PROGMEM int SCREEN_BITAXE_BESTDIFF = 81;
 
+
 const PROGMEM int SCREEN_COUNTDOWN = 98;
 const PROGMEM int SCREEN_CUSTOM = 99;
 const int SCREEN_COUNT = 7;
@@ -73,7 +66,12 @@ const int usPerMinute = 60 * usPerSecond;
 extern const char *isrg_root_x1cert;
 
 extern const uint8_t rootca_crt_bundle_start[] asm("_binary_x509_crt_bundle_start");
+// extern const uint8_t ocean_logo_comp[] asm("_binary_ocean_gz_start");
+// extern const uint8_t ocean_logo_comp_end[] asm("_binary_ocean_gz_end");
 
+// uint8_t* getOceanIcon();
+
+// const size_t ocean_logo_size = ocean_logo_comp_end - ocean_logo_comp;
 
 const PROGMEM char UPDATE_FIRMWARE = U_FLASH;
 const PROGMEM char UPDATE_WEBUI = U_SPIFFS;
@@ -85,4 +83,15 @@ struct ScreenMapping {
 };
 
 String calculateSHA256(uint8_t* data, size_t len);
-String calculateSHA256(WiFiClient *stream, size_t contentLength);
+String calculateSHA256(WiFiClient *stream, size_t contentLength);
+
+namespace ArduinoJson {
+  template <typename T>
+  struct Converter<std::vector<T>> {
+    static void toJson(const std::vector<T>& src, JsonVariant dst) {
+      JsonArray array = dst.to<JsonArray>();
+      for (T item : src)
+        array.add(item);
+    }
+  };
+}

src/lib/timers.cpp

@@ -72,6 +72,10 @@ void IRAM_ATTR minuteTimerISR(void *arg) {
     vTaskNotifyGiveFromISR(bitaxeFetchTaskHandle, &xHigherPriorityTaskWoken);
   }
 
+  if (miningPoolStatsFetchTaskHandle != NULL) {
+    vTaskNotifyGiveFromISR(miningPoolStatsFetchTaskHandle, &xHigherPriorityTaskWoken);
+  }
+
   if (xHigherPriorityTaskWoken == pdTRUE) {
     portYIELD_FROM_ISR();
   }

src/lib/webserver.cpp

@@ -513,7 +513,7 @@ void onApiSettingsPatch(AsyncWebServerRequest *request, JsonVariant &json)
   String strSettings[] = {"hostnamePrefix", "mempoolInstance", "nostrPubKey", 
                           "nostrRelay", "bitaxeHostname", "nostrZapPubkey", 
                           "httpAuthUser", "httpAuthPass", "gitReleaseUrl",
-                          "mqttHost", "mqttRootTopic"};
+                          "mqttUrl", "mqttRootTopic"};
 
   for (String setting : strSettings)
   {
@@ -549,9 +549,10 @@ void onApiSettingsPatch(AsyncWebServerRequest *request, JsonVariant &json)
                            "mdnsEnabled", "otaEnabled", "stealFocus",
                            "mcapBigChar", "useSatsSymbol", "useBlkCountdown",
                            "suffixPrice", "disableLeds", "ownDataSource",
-                           "mowMode", "suffixShareDot", "mqttEnabled",
+                           "mowMode", "suffixShareDot", "flOffWhenDark",
                            "flAlwaysOn", "flDisable", "flFlashOnUpd",
                            "mempoolSecure", "useNostr", "bitaxeEnabled",
+                           "miningPoolStats", "verticalDesc", "mqttEnabled",
                            "nostrZapNotify", "stagingSource", "httpAuthEnabled"};
 
   for (String setting : boolSettings)
@@ -692,6 +693,8 @@ void onApiSettingsGet(AsyncWebServerRequest *request)
   root["suffixPrice"] = preferences.getBool("suffixPrice", DEFAULT_SUFFIX_PRICE);
   root["disableLeds"] = preferences.getBool("disableLeds", DEFAULT_DISABLE_LEDS);
   root["mowMode"] = preferences.getBool("mowMode", DEFAULT_MOW_MODE);
+  root["verticalDesc"] = preferences.getBool("verticalDesc", DEFAULT_VERTICAL_DESC);
+
   root["suffixShareDot"] = preferences.getBool("suffixShareDot", DEFAULT_SUFFIX_SHARE_DOT);
 
   root["hostnamePrefix"] = preferences.getString("hostnamePrefix", DEFAULT_HOSTNAME_PREFIX);
@@ -714,14 +717,18 @@ void onApiSettingsGet(AsyncWebServerRequest *request)
   root["bitaxeEnabled"] = preferences.getBool("bitaxeEnabled", DEFAULT_BITAXE_ENABLED);
   root["bitaxeHostname"] = preferences.getString("bitaxeHostname", DEFAULT_BITAXE_HOSTNAME);
 
+  root["miningPoolStats"] = preferences.getBool("miningPoolStats", DEFAULT_MINING_POOL_STATS_ENABLED);
+  root["miningPoolName"] = preferences.getString("miningPoolName", DEFAULT_MINING_POOL_NAME);
+  root["miningPoolUser"] = preferences.getString("miningPoolUser", DEFAULT_MINING_POOL_USER);
+  root["availablePools"] = PoolFactory::getAvailablePools();
+
   root["mqttEnabled"] = preferences.getBool("mqttEnabled", DEFAULT_MQTT_ENABLED);
-  root["mqttHost"] = preferences.getString("mqttHost", "");
+  root["mqttUrl"] = preferences.getString("mqttUrl", DEFAULT_MQTT_URL);
   root["mqttRootTopic"] = preferences.getString("mqttRootTopic", DEFAULT_MQTT_ROOTTOPIC);
 
   root["httpAuthEnabled"] = preferences.getBool("httpAuthEnabled", DEFAULT_HTTP_AUTH_ENABLED);
   root["httpAuthUser"] = preferences.getString("httpAuthUser", DEFAULT_HTTP_AUTH_USERNAME);
   root["httpAuthPass"] = preferences.getString("httpAuthPass", DEFAULT_HTTP_AUTH_PASSWORD);
-
 #ifdef HAS_FRONTLIGHT
   root["hasFrontlight"] = true;
   root["flDisable"] = preferences.getBool("flDisable");
@@ -733,6 +740,8 @@ void onApiSettingsGet(AsyncWebServerRequest *request)
 
   root["hasLightLevel"] = hasLightLevel();
   root["luxLightToggle"] = preferences.getUInt("luxLightToggle", DEFAULT_LUX_LIGHT_TOGGLE);
+  root["flOffWhenDark"] = preferences.getBool("flOffWhenDark", DEFAULT_FL_OFF_WHEN_DARK);
+
 #else
   root["hasFrontlight"] = false;
   root["hasLightLevel"] = false;
@@ -753,17 +762,8 @@ void onApiSettingsGet(AsyncWebServerRequest *request)
 #endif
   JsonArray screens = root["screens"].to<JsonArray>();
 
-  JsonArray actCurrencies = root["actCurrencies"].to<JsonArray>();
-  for (const auto &str : getActiveCurrencies())
-  {
-    actCurrencies.add(str);
-  }
-
-  JsonArray availableCurrencies = root["availableCurrencies"].to<JsonArray>();
-  for (const auto &str : getAvailableCurrencies())
-  {
-    availableCurrencies.add(str);
-  }
+  root["actCurrencies"] = getActiveCurrencies();
+  root["availableCurrencies"] = getAvailableCurrencies();
 
   std::vector<ScreenMapping> screenNameMap = getScreenNameMap();
 

src/lib/webserver.hpp

@@ -14,6 +14,7 @@
 #include "lib/price_notify.hpp"
 #include "lib/screen_handler.hpp"
 #include "webserver/OneParamRewrite.hpp"
+#include "lib/mining_pool/pool_factory.hpp"
 
 extern TaskHandle_t eventSourceTaskHandle;
 

src/main.cpp

@@ -51,7 +51,7 @@ extern "C" void app_main()
       if (hasLightLevel()) {
         if (preferences.getUInt("luxLightToggle", DEFAULT_LUX_LIGHT_TOGGLE) != 0)
         {
-          if (hasLightLevel() && getLightLevel() <= 2)
+          if (hasLightLevel() && getLightLevel() <= 1 && preferences.getBool("flOffWhenDark", DEFAULT_FL_OFF_WHEN_DARK))
           {
             if (frontlightIsOn()) {
               frontlightFadeOutAll();

test/test_datahandler/test_main.cpp

@@ -33,6 +33,17 @@ void test_CorrectSatsPerDollarConversion(void)
     TEST_ASSERT_EQUAL_STRING("4", output[NUM_SCREENS - 1].c_str());
 }
 
+void test_SatsPerDollarAfter1B(void)
+{
+    std::array<std::string, NUM_SCREENS> output = parseSatsPerCurrency(120000000, CURRENCY_USD, false);
+    TEST_ASSERT_EQUAL_STRING("SATS/USD", output[0].c_str());
+    TEST_ASSERT_EQUAL_STRING("0", output[NUM_SCREENS - 5].c_str());
+    TEST_ASSERT_EQUAL_STRING(".", output[NUM_SCREENS - 4].c_str());
+    TEST_ASSERT_EQUAL_STRING("8", output[NUM_SCREENS - 3].c_str());
+    TEST_ASSERT_EQUAL_STRING("3", output[NUM_SCREENS - 2].c_str());
+    TEST_ASSERT_EQUAL_STRING("3", output[NUM_SCREENS - 1].c_str());
+}
+
 void test_CorrectSatsPerPoundConversion(void)
 {
     std::array<std::string, NUM_SCREENS> output = parseSatsPerCurrency(37253, CURRENCY_GBP, false);
@@ -98,9 +109,41 @@ void test_PriceSuffixMode(void)
     TEST_ASSERT_EQUAL_STRING("K", output[NUM_SCREENS - 1].c_str());
 }
 
+void test_PriceSuffixModeCompact1(void)
+{
+    std::array<std::string, NUM_SCREENS> output = parsePriceData(100000, '$', true, false, true);
+
+    std::string joined = joinArrayWithBrackets(output);
+
+    TEST_ASSERT_EQUAL_STRING_MESSAGE("BTC/USD", output[0].c_str(), joined.c_str());
+
+    TEST_ASSERT_EQUAL_STRING_MESSAGE("$", output[NUM_SCREENS - 6].c_str(), joined.c_str());
+    TEST_ASSERT_EQUAL_STRING_MESSAGE("1", output[NUM_SCREENS - 5].c_str(), joined.c_str());
+    TEST_ASSERT_EQUAL_STRING_MESSAGE("0", output[NUM_SCREENS - 4].c_str(), joined.c_str());
+    TEST_ASSERT_EQUAL_STRING_MESSAGE("0.", output[NUM_SCREENS - 3].c_str(), joined.c_str());
+    TEST_ASSERT_EQUAL_STRING_MESSAGE("0", output[NUM_SCREENS - 2].c_str(), joined.c_str());
+    TEST_ASSERT_EQUAL_STRING_MESSAGE("K", output[NUM_SCREENS - 1].c_str(), joined.c_str());
+}
+
+void test_PriceSuffixModeCompact2(void)
+{
+    std::array<std::string, NUM_SCREENS> output = parsePriceData(1000000, '$', true, false, true);
+
+    std::string joined = joinArrayWithBrackets(output);
+
+    TEST_ASSERT_EQUAL_STRING_MESSAGE("BTC/USD", output[0].c_str(), joined.c_str());
+
+    TEST_ASSERT_EQUAL_STRING_MESSAGE("$", output[NUM_SCREENS - 6].c_str(), joined.c_str());
+    TEST_ASSERT_EQUAL_STRING_MESSAGE("1.", output[NUM_SCREENS - 5].c_str(), joined.c_str());
+    TEST_ASSERT_EQUAL_STRING_MESSAGE("0", output[NUM_SCREENS - 4].c_str(), joined.c_str());
+    TEST_ASSERT_EQUAL_STRING_MESSAGE("0", output[NUM_SCREENS - 3].c_str(), joined.c_str());
+    TEST_ASSERT_EQUAL_STRING_MESSAGE("0", output[NUM_SCREENS - 2].c_str(), joined.c_str());
+    TEST_ASSERT_EQUAL_STRING_MESSAGE("M", output[NUM_SCREENS - 1].c_str(), joined.c_str());
+}
+
 void test_PriceSuffixModeMow(void)
 {
-    std::array<std::string, NUM_SCREENS> output = parsePriceData(93000, '$', true, true);
+    std::array<std::string, NUM_SCREENS> output = parsePriceData(93600, '$', true, true);
 
     std::string joined = joinArrayWithBrackets(output);
 
@@ -115,11 +158,12 @@ void test_PriceSuffixModeMow(void)
 
 void test_PriceSuffixModeMowCompact(void)
 {
-    std::array<std::string, NUM_SCREENS> output = parsePriceData(93000, '$', true, true, true);
+    std::array<std::string, NUM_SCREENS> output = parsePriceData(93600, '$', true, true, true);
 
     std::string joined = joinArrayWithBrackets(output);
 
-    TEST_ASSERT_EQUAL_STRING("BTC/USD", output[0].c_str());
+    TEST_ASSERT_EQUAL_STRING_MESSAGE("MOW/UNITS", output[0].c_str(), joined.c_str());
+
     TEST_ASSERT_EQUAL_STRING_MESSAGE("$", output[NUM_SCREENS - 6].c_str(), joined.c_str());
     TEST_ASSERT_EQUAL_STRING_MESSAGE("0.", output[NUM_SCREENS - 5].c_str(), joined.c_str());
     TEST_ASSERT_EQUAL_STRING_MESSAGE("0", output[NUM_SCREENS - 4].c_str(), joined.c_str());
@@ -234,6 +278,7 @@ int runUnityTests(void)
     UNITY_BEGIN();
     RUN_TEST(test_CorrectSatsPerDollarConversion);
     RUN_TEST(test_CorrectSatsPerPoundConversion);
+    RUN_TEST(test_SatsPerDollarAfter1B);
     RUN_TEST(test_SixCharacterBlockHeight);
     RUN_TEST(test_SevenCharacterBlockHeight);
     RUN_TEST(test_FeeRateDisplay);
@@ -246,6 +291,8 @@ int runUnityTests(void)
     RUN_TEST(test_Mcap1TrillionJpy);
     RUN_TEST(test_Mcap1TrillionJpySmallChars);
     RUN_TEST(test_PriceSuffixMode);
+    RUN_TEST(test_PriceSuffixModeCompact1);
+    RUN_TEST(test_PriceSuffixModeCompact2);
     RUN_TEST(test_PriceSuffixModeMow);
     RUN_TEST(test_PriceSuffixModeMowCompact);