From 6e1c370ec35d579854e84d17d59c3e4c7c876697 Mon Sep 17 00:00:00 2001 From: djuri Date: Mon, 23 Jun 2025 14:32:43 +0000 Subject: [PATCH] Update hardware/rev_b.md --- hardware/rev_b.md | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/hardware/rev_b.md b/hardware/rev_b.md index fb55d44..8fa8a0e 100644 --- a/hardware/rev_b.md +++ b/hardware/rev_b.md @@ -37,7 +37,7 @@ Mount the two M3x12 standoff F-F (Yellow) at the front with the last two of the Place the displays on the top of the 11mm standoffs and mount them with the 6mm screws. -**NOTE:** The WeAct displays work fine but have 8 pins, the displays with frontlight have 10 pins (only available from us atm). When using WeAct displays the two most right pins are not used, see the pictures below. +**NOTE:** The WeAct displays work fine but have 8 pins, the displays in the complete kit supplied by BTClock have 10 pins. When using WeAct displays the two most right pins are not used, see the pictures below. **NOTE:** Keep in mind, if you have chosen to use the WeAct displays, you have to solder the headers (The yellow ones) by yourself. @@ -55,4 +55,4 @@ Keep in mind that at the corners on the top of the first (left corner) and last -At last, place the acrylic back on the back with the last 8 M3x6 screws. \ No newline at end of file +As final step, place the acrylic back on the back with the last 8 M3x6 screws (Don't forget to remove any protective foil on both sides) \ No newline at end of file