diff --git a/hardware/rev_b.md b/hardware/rev_b.md
index 8fa8a0e..4259e60 100644
--- a/hardware/rev_b.md
+++ b/hardware/rev_b.md
@@ -1,6 +1,6 @@
# Rev.B (With or without front light)
-
+
# Parts list
@@ -37,22 +37,10 @@ Mount the two M3x12 standoff F-F (Yellow) at the front with the last two of the
Place the displays on the top of the 11mm standoffs and mount them with the 6mm screws.
-**NOTE:** The WeAct displays work fine but have 8 pins, the displays in the complete kit supplied by BTClock have 10 pins. When using WeAct displays the two most right pins are not used, see the pictures below.
-
-**NOTE:** Keep in mind, if you have chosen to use the WeAct displays, you have to solder the headers (The yellow ones) by yourself.
-
-
-
-(only for WeAct displays)
-
-
-
-(only for WeAct displays)
-
Keep in mind that at the corners on the top of the first (left corner) and last (right corner) display you don't use a screw, this is where a 6mm standoff has to placed to screw the front pcb in combination with acrylic front. For mounting the fromt pcb with the acrylic front use the M3x10 screw.
-
+
-As final step, place the acrylic back on the back with the last 8 M3x6 screws (Don't forget to remove any protective foil on both sides)
\ No newline at end of file
+At last, place the acrylic back on the back with the last 8 M3x6 screws.
\ No newline at end of file
diff --git a/media/Rev.B/IMG_3548.jpeg b/media/Rev.B/IMG_3548.jpeg
deleted file mode 100644
index e924ec4..0000000
Binary files a/media/Rev.B/IMG_3548.jpeg and /dev/null differ
diff --git a/media/Rev.B/IMG_3549.jpeg b/media/Rev.B/IMG_3549.jpeg
deleted file mode 100644
index 51da056..0000000
Binary files a/media/Rev.B/IMG_3549.jpeg and /dev/null differ
diff --git a/media/Rev.B/IMG_3550.jpeg b/media/Rev.B/IMG_3550.jpeg
deleted file mode 100644
index cb3117b..0000000
Binary files a/media/Rev.B/IMG_3550.jpeg and /dev/null differ