btclock/docs
3
0
Fork 1
Code Issues Pull requests Wiki Activity

Update hardware/rev_b.md

Browse source
This commit is contained in:
Djuri 2025-06-23 14:32:43 +00:00
parent 1d98480aaf
commit 6e1c370ec3
1 changed files with 2 additions and 2 deletions
Download patch file Download diff file Expand all files Collapse all files

4
hardware/rev_b.md
View file

@ -37,7 +37,7 @@ Mount the two M3x12 standoff F-F (Yellow) at the front with the last two of the
Place the displays on the top of the 11mm standoffs and mount them with the 6mm screws. Place the displays on the top of the 11mm standoffs and mount them with the 6mm screws.
**NOTE:** The WeAct displays work fine but have 8 pins, the displays with frontlight have 10 pins (only available from us atm). When using WeAct displays the two most right pins are not used, see the pictures below. **NOTE:** The WeAct displays work fine but have 8 pins, the displays in the complete kit supplied by BTClock have 10 pins. When using WeAct displays the two most right pins are not used, see the pictures below.
**NOTE:** Keep in mind, if you have chosen to use the WeAct displays, you have to solder the headers (The yellow ones) by yourself. **NOTE:** Keep in mind, if you have chosen to use the WeAct displays, you have to solder the headers (The yellow ones) by yourself.
@ -55,4 +55,4 @@ Keep in mind that at the corners on the top of the first (left corner) and last
<img src="../media/Rev.B/IMG_3550.jpeg" width="750"/> <img src="../media/Rev.B/IMG_3550.jpeg" width="750"/>
At last, place the acrylic back on the back with the last 8 M3x6 screws. As final step, place the acrylic back on the back with the last 8 M3x6 screws (Don't forget to remove any protective foil on both sides)